HangZhou Hoyee trade Co.,Ltd

WELL DONE OR NOTHING

316 Stainless Steel Fluorine Lining Regulating Valve

316 Stainless Steel Fluorine Lining Regulating Valve

ZXPF/ZDLPF/ZAZPF series pneumatic/motorized single seat Fluorine Lining regulating valve are made up Multiple springs actuator (or motor) and single seat Fluorine lining valve seat.The valve contact part with medium which use anti-corrosion, anti-aging material named FEP.The 3mm thickness of FEP...

Send InquiryChat Now
Product Details

1. Pneumatic/electric lined single-seat control valve is the execution unit in automation instrument system; It consists of many spring film actuators/electric actuators and through-way fluorine-lined single-seat regulator. Installed on the medium pipeline and operated with other instrument to control parameters such as flow rate etc. Due to the wetted parts of valve are lined with fluorine plastic (PTFE, PFA, FEP), and the stem sealing adopts PTFE bellow and packing, it has better performance in corrosion resistance and sealing and its installation has better reliability. It's suitable for any corrosive medium except for "molten alkali metals and fluorine element". The lined control valves are widely used in petrochemical, electric power, metallurgy, pulp&paper and other industrial automation device. 
2. Operating method: Electric, pneumatic, hydraulic
3. Lining material: FEP, PFA, GXPO etc. 

Structure and Operation Principle
1. Pneumatic/electric fluorine-lined control valve is consists of lined control valve body and straight travel pneumatic spring diaphragm actuator or electric actuator. 
2. Pneumatic/electric actuator is an important part of automatic control system. Pneumatic actuators (figure 1) have both direct and indirect action. When air pressure increases, the push rod stretch out the membrane room, it is called direct action. When air pressure increases, the push rod back into membrane room, it is called indirect action, together with valve body to constitute the air-to-close. 
Figure 2 shows the working principle of positioned on electrical/pneumatic valve: When the pressure signal input into membrane room, generating pushing force to the diaphragm to compress the spring, making the push rod move to drive the stem, changing the flow area between the valve trim and seat, until the counteractive by spring keep balance with pushing force on diaphragm by signal pressure, so as to achieve the purpose of process parameters automatic adjustment.

 image001(001).jpg  

blob.png

1.Valve seat lining   2. Bellows    3.  Bonnet    4. Packing  5. Bracket  6. Pneumatic/Motorized  actuator


image005(001).jpg


Main technical specification

Body

Type: Single-Seated ball valve

DN: 20-200mm

PN: ANSI150;PN1.0,1.6,2.5MPa

Connection: Flange

Body Material: WCB lined F46,304 lined F46,WCB lined PFA,304 lined PFA

Bellows Material: PTFE

Packing: PTFE packing V-shaped.

 

Valve trim

Valve disc: single-seated plunger valve disc

Control characteristic: Equal percentage, linear, quick open

Trim Material:WCB lined F46,CF8 lined F46,WCB lined PFA,CF8 lined PFA.

  

Actuator

(1)Pneumatic-actuator

Type 6100 Pneumatic Diaphragm Actuators

Membrane material: Ethylene propylene rubber filled with nylon

Spring range: 20-100KPa,40-200KPa,80-240KPa

Air supply pressure: 140KPa,160KPa,280KPa,400KPa

Air supply connection:Rc1/4,Rc3/8

Environment Temp: -30-+70℃

Acting type: air open ( reverse acting), air close (positive acting)


(2)Electric actuators

Type: 6200 series electric actuators

Voltage: 220V,380V

Environment Temp: -30-+70℃

Control Signal: 4-20mADC(supply 4-20mA signal feedback as per customer requirement)
  

Performance

Leakage rate: accordance with ANSI B16.10VI level which is less than 0.01% of rating CV.

Adjustable: 30:1
Variation: 1%( with positioner) 3% (no positioner)

Linear: ±2%( with positioner) ±5% (no positioner)

 

Accessories ( As per requirements)

Positioner, Filter Regulator, hand wheel, limit switch, solenoid valve, valve position transmitter, pneumatic valve, speed increaser, lock up valve etc.

image007(001).jpg

Manufacturing and Supplying All Kinds of Automatic Valves
Hoyee specializes in designing, manufacturing and supplying all kinds of automatic valves. Our products cover electric valves (ball valves, butterfly valves, gate vales and more), pneumatic valves (angle seated valves, ball valves, butterfly valves and more), control valves, regulating valves and more.
 
Supported by More than 600 Employees
Currently, we have more than 150 employees, including 30 more engineers and technicians. In addition, we also have two complete original production and auto-inspection lines from Germany, digital lathes and CNC machines to guarantee the quality and safety of our products. On the further strategy, our advantages help us hold an unbeatable stand in Industry 4.0.

image009`.jpg
image012.jpg
image010.jpg
image011.jpg


image017(001).jpgimage020.jpg 

Packing Details: Wooden box and plywood case, standard export  packing.
In addition that we can  design and pack as your request.
Delivery Details : Shipped in 5-15 days after payment.

 

image021(001).jpg  

1. Are you a factory or the trading company?
Q:We are manufacturing factory and we have the export licensed

2. Do you have any guarantee on the quality of your valves?
 Q:Quality assurance for more than one year

3.What is you delivery time?
Q:A week for sample; 15-30days for mass production.

4.Which port are you shipping?
Q:Ningbo or Shanghai Port

5.Can we print the LOGO on products?
Yes, and we support the OEM.

6.Do you have any certification?
Q:Yes, we have 12  patents for the products.

7.Why can we trust that you will deliver goods after remittance?
Q:We are the honest merchant.and you will get the assurance from Made-in-china if you choose us,and  our factory has been inspected by SGS .

8.Can I get some samples?
Q:Yes .Free samples will be sent to you by express mail


9.May I visit your factory?
Q:Sure,welcome any time. We can also pick you up at airport and station.

10.We are always ready for providing the sample and producing some small orders, in order to meet the business well.
Q:We are always ready to hear from you.


316 Stainless Steel Fluorine Lining Regulating Valve.jpg


 Mail address:Infor@hoyeevalve.com
 Website:www.hoyeevalve.com




Hot Tags: 316 stainless steel fluorine lining regulating valve, China, suppliers, manufacturers, factory, wholesale
Related Products
Inquiry