A Globe valves is a linear motion valve and are primarily designed to stop, start and regulate flow. The disk of a Globe valve can be totally removed from the flowpath or it can completely close the flowpath.
Conventional Globe valves may be used for isolation and throttling services. Although these valves exhibit slightly higher pressure drops than straight=through valves (e.g., gate, plug, ball, etc.), they may be used where the pressure drop through the valve is not a controlling factor.
Because the entire system pressure exerted on the disc is transferred to the valve stem, the practical size limit for these valves is NPS 12 (DN 300). Globe valves larger than NPS 12 (DN 300) are an exception rather than the rule. Larger valves would require that enormous forces be exerted on the stem to open or close the valve under pressure. Globe valves in sizes up to NPS 48 (DN 1200) have been manufactured and used.
Globe valves are extensively employed to control flow. The range of flow control, pressure drop, and duty must be considered in the design of the valve to avert premature failure and to assure satisfactory service. Valves subjected to high-differential pressure-throttling service require specially designed valve trim.
Related Industry Knowledge
- Butterfly valve history
- Butterfly valve structure features
- Butterfly valve advantages
- Ball valve
- Ball valve history
- Ball valve advantages
- Ball valve classification
- Three-way ball valve features
- Regulating valve
- Regulator valve classification
- Body designs of Globe valves
- Disk & Seat & Stem of Globe valves
- Physical properties of stainless steel
- Construction of a Globe valve
- Flow direction of Globe valves
- Advantages and disadvantages of Glo...
- Typical Applications of Globe valves
- Introduction to Valves - Gate valves
- Disks of a Gate valve
- Stem of a Gate valve